IP601 / IP602 / IP603

These 3 modules are identical.

IP601 controls the 8 master subgroups outputs.
IP602 controls Aux A master outputs 1 to 8
IP603 controls Aux B master outputs 1 to 8


Click image to enlarge
Stacks Image 62
IP601

IP601 is master for the 8 subgroups.
Each pot controls the output of the respective group bus.

The group bus includes all channels which have been routed to the bus, and any signal which may be inserted at the Group Bus inputs on the back panel.

The
[AFL] switch allows the output to be monitored.
Note that the AFL switch does not follow the Global Solo selection, since there is not much point in using this as PFL or SIP.

Stacks Image 53
IP603

IP603 is master for the Aux B busses.
Each pot controls the output of the respective
Aux B bus.

The
Aux B bus includes all signals which have been send to the Aux B bus, and any signal which may be inserted at the Aux B bus inputs on the back panel.

The
[AFL] switch allows the output to be monitored.
Note that the AFL switch does not follow the Global Solo selection, since there is not much point in using this as PFL or SIP.

Stacks Image 48
IP602

IP602 is master for the Aux A busses.
Each pot controls the output of the respective
Aux A bus.

The
Aux A bus includes all signals which have been send to the Aux A bus, and any signal which may be inserted at the Aux A Bus inputs on the back panel.

The
[AFL] switch allows the output to be monitored.
Note that the AFL switch does not follow the Global Solo selection, since there is not much point in using this as PFL or SIP.